Pallet Stackers

Pallet stackers are a kind of pallet jack that may be used to stack, transfer and haul goods positioned on a pallet that are far too tedious for physical lifting. Mainly these mechanisms are utilized to load and unload freight from trucks and to move pallets from one location to another within a warehouse of storeroom space. On the whole pallet jacks are constructed of heavy duty materials to endure tremendous weights. Pallet stackers are often identified as pallet jacks. They can be operated from a seated, upright or walk-behind position. Pallet stackers are separated into manual and powered types.

Certain fundamental components comprise the pallet stacker. There are forks that slide under a pallet, capable of transporting and lifting it to a desired height. The engine section or casing houses the gas-run, electronic or hydraulic gear that powers the appliance.

Manual pallet stackers are hand-powered. They operate hydraulically to make lifting tedious pallets an easier job. Usually a walk-behind version meaning they are utilized by pulling and pushing the stacker to its preferred location. Using a foot pedal or handle raises the stacker’s forks. Squeezing a handle or trigger returns the forks to the ground. These designs of pallet jacks are ideal for lighter loads of up to approximately 1 ton or 907.18 kg.

Most jacks may accommodate the raising of heavy weights to around 5 tons with both the gas or electric machines. They are physically less demanding to control than the manual versions thanks to the hydraulic power that hoists and lowers the forks. These styles are steered by turning the handle in a specific direction. There is a button on the knob that operates to hoist and lower the forks. A throttle set up on the stacker’s handle moves the machine forward and in reverse. This variety of equipment is generally referred to as a lift truck and is used from a sit-down posture.

As the fork width, weight maximum and lift height fluctuate dramatically between different versions, choosing the correct pallet stacker to suit the activity is essential. Some stacker’s lift height may tolerate multiple pallets to be stacked, while others might only allow two at a time. Some designs of these lift trucks include an modifiable fork so as to allow the stacker to slide underneath pallets of atypical sizes and shapes. Several fork models can be fairly successful when different varieties of pallets are being used in the same stockroom.

Click to Download the pdf