Langley Crane Training

Langley Crane Training - Bridge cranes or likewise called overhead cranes are actually a kind of industrial material handling crane using a line and hook device that runs on a horizontal beam running along two widely separated rails. Various overhead cranes could be seen inside a long factory building and they could run along the building's two long walls, similar to a gantry crane.

Overhead cranes typically include either double beam or one beam construction. These are made from more complex girders or normal steel. The single bridge box girder crane is complete with the system and the hoist and is operated making use of a control pendant. Whenever the application requires heavier capacity systems for at least ten tons, double girder bridge cranes are more common.

With the girder box configuration, one main advantage is the stronger integrity of the overall system with lower deadweight. Another benefit would be the hoist to lift the objects and the bridge which spans the area covered by the crane, along with a trolley to be able to move along the bridge.

Overhead cranes are most frequently used within the steel industry. The steel is handled with this particular crane at each stage of the manufacturing process until the product is transported from the factory. The crane is also responsible for pouring raw materials into a furnace and hot steel is then stored for cooling utilizing an overhead crane. As soon as the coils are finished they are loaded onto trucks and trains via overhead crane. The stamper or fabricator even relies on overhead cranes in order to deal with steel in the factory.

The automobile trade normally utilizes the overhead crane in order to handle raw materials. There are smaller workstation cranes which are used to handle lighter loads inside work areas like in CNC shops and sawmills.

Bridge cranes can be found in almost all paper mills. They are used for normal repairs requiring removal of heavy press rolls as well as several equipment. Some of the cast iron paper drying drums and various pieces of specialized equipment weigh as much as 70 tons. The bridge cranes are utilized in the primary construction of the paper equipment to be able to facilitate installation of these enormously heavy items.

The cost of a bridge crane can be largely offset in many cases with savings incurred from not renting mobile cranes when a facility is being constructed that uses a lot of heavy process machinery.

The Rotary Overhead crane has one end of the bridge connected on a fixed pivot and the other end carried on an annular track. The bridge traverses the circular area below. Rotary Overhead cranes supply improvement over a Jib crane by making it possible to offer a longer reach while eliminating lateral strains on the building walls.

One of the first companies in the world to mass produce the very first steam powered crane was Demag Cranes & Components Corp. Following along came Alliance Machine, who is now defunct. Alliance holds an AISE citation for one of the earliest cranes in the United States market. This particular crane was utilized in service until about the year 1980 and has been retired into a museum in Birmingham, Alabama.

Lots of innovations have come and gone ever since the very first cranes, like for instance, the Weston load brake is now practically obsolete, while the wire rope hoist is still popular. The wire rope hoist was first hoisted to contain components mated together in order to form a built-up style hoist. These super industrial hoists are used for heavy-duty applications like steel coil handling for example. They are even common for users who desire better quality and long life from their machinery. These built up hoists likewise provide for easier upkeep.

Now, most hoist are package hoists meaning that they are made into one unit in a single housing. These hoists are typically designed for ten years of life. This particular estimate is based on an industry standard wear and tear when calculating actual life.

The Material Handling Business in North America, there are very few governing bodies in the industry. The Crane Manufacturers Association of America is represented by the Overhead Alliance which also represents HMI or otherwise referred to as Hoist Manufacturers Institute and MMA or likewise referred to as Monorail Manufacturers Association. The members of this group are marketing representatives of the member companies and these product counsels have joined forces to create advertising materials to be able to raise the awareness of the advantages to overhead lifting.

Click to Download the pdf