Langley Forklift Training School

Langley Forklift Training School - Forklift Training School And What It Truly Has To Provide - Industry and federal regulators have established the criteria for forklift safety training according to their current standards and regulations. People wishing to utilize a forklift must complete a forklift training program prior to utilizing one of these machinery. The accredited Forklift Operator Training Program is designed to offer individuals training with the practical skills and knowledge to become a forklift operator.

There are forklift operation safety rules that should be followed pertaining to pre-shift inspections, and rules for lifting and loading.

Prior to a shift starting, an inspection checklist needs to be completed and submitted to the Supervisor or Instructor. If any maintenance issue is discovered, the machine should not be operated until the problem is addressed. To indicate the machine is out of order, the keys should be removed from the ignition and a warning tag placed in a location which is seen.

Safety regulations for loading would comprise checking the forklift's load rating capacity to know how much the machine can handle. When starting the machine, the forks must be in the downward position. Don't forget that there is a loss of roughly one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

Lifting should begin with the driver moving to a stopped position around three inches away from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to an inch underneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other workers. Do not allow forks to drag on the ground.

Click to Download the pdf